Parasound HALO JC5 High-End Amplifier

Кратко описание:

Върхов модел крайно стъпало на Parasound с DUAL-Mono структура разработен от легндата в High-End технологията John Curl 
Възможност за работа в клас A / AB

400 watts x 2 @ 8 Ω RMS, both channels driven
600 watts x 2 @ 4 Ω RMS, both channels driven
1200 watts x 1@ 8 Ω, in bridged mode
Ultra-high bias Class A/AB operation
12 watts per channel of pure Class A power
90 amperes peak current per channel
Stable with speaker impedance dips to 1.5 Ω
Balanced inputs with discrete circuits
CHK Infinium, custom 5-way speaker binding posts
Neutrik locking XLR input connectors
Vampire gold-plated RCA input & loop output jacks
Direct-coupled signal path, no capacitors or inductors
DC Servo and relay protection circuits
AC turn-on inrush surge protection with relay bypass
Dual-mono input stages with ±110 volt DC rails
JFET input stage, MOSFET driver stage
24 beta-matched 15 ampere, 60 MHz bipolar output transistors
1.7 kVA shielded toroid power transformer with independent windings for each channel
Independent power supplies for left & right channel input stages, driver stages, output stages
8,880 µF Nichicon Gold Tune filter capacitors for input stages
132,000 µF Rubycon filter capacitors for output stages
Full power is rated all the way down to 5Hz for unrestricted low-end bass
Harris hyper-fast soft-recovery bridge diode rectifiers
Automatic turn-on by 12 V trigger or audio sensing
4 rack space chassis with rear carry handles
Rack mount hardware is included
Available in silver or black

Цена: 14699 лв.


Power Output – Both Channels Driven 400 watts x 2, 8 Ω 
                                                        600 watts x 2, 4 Ω 
Power Output – Bridged Mode  1200 watts x 1, 8 Ω 

Frequency Response 5 Hz - 100 kHz, +0/-3 dB 
                            20 Hz - 20 kHz, +0/-0.25 dB 
Total Harmonic Distortion (THD) < 0.05 % at full power 
                                               < 0.03 % at typical listening levels IM 
Distortion  < 0.04 %

Bridged 4 Ω operation is not recommended Power measurement parameters are at 120 VAC: 
0.05% THD, RMS continuous power, full audio band (20 Hz - 20 kHz) 
Current Capacity 90 amps peak, per channel 
Slew Rate > 130 volts per microsecond 

Frequency Response 5 Hz - 100 kHz, +0/-3 dB 
                   20 Hz - 20 kHz, +0/-0.25 dB 
Total Harmonic Distortion (THD) < 0.05 % at full power 
                                < 0.03 % at typical listening levels IM 
Distortion  < 0.04 %

DC Trigger Requirements  +9 Vdc to +12 Vdc, 5 mA

Dimensions 
Width: 448 mm 
Height without feet: 181 mm
Height with feet:197 mm
Depth: 508 mm
Depth with cables: 546 mm 

Net Weight 33.1 kg
Shipping Weight 40.8 kg

Power Requirement 
Standby: 1 Watt 
Idle (no music playing): 225 Watts 
Typical listening levels: 400 Watts 
Maximum: 1500 Watts