Звукови процесори

Позволява управление и настройки без използване на лаптоп

Pioneer DEQ-S1000A2 Универсален 48-bit двуядрен аудио процесор

Pioneer DEQ-S1000A2 е универсалният звуков процесор на Pioneer, предназначен за надграждане на качеството на звука на вашето фабрично превозно средство и високоговорители. Тъй като оригинално монтираната уредба не се нуждае от смяна, инсталирането е лесно. Благодарение на компактния си размер, той може да се монтира извън полезрението, което допринася за по-чиста инсталация.

Pioneer DEQ-S1000A2 включва изцяло персонализирания високопроизводителен 48-битов двуядрен DSP (Digital Signal Processor) на Pioneer за висококачествено премиум звуково възпроизвеждане. Вътрешният часовник и шаблонът са оптимално настроени. Влошаването на звука от шума на трептене е напълно елиминирано.

Когато се използва заедно с приложението Sound Tune на Pioneer, можете да донесете висок клас аудио към основните фабрични високоговорители. Всички операции се извършват лесно, чрез съвместим смартфон и широк набор от настройки са достъпни от настройки за симулация на живо до 31-лентови персонализирани настройки на еквалайзера чрез приложението Sound Tune.

DEQ-S1000A2 предлага по-лесно свързване благодарение на включените ISO T-Harness и OTG кабели за потребители на смартфони с Android.

Основни характеристики:

Pioneer Sound Tune App – Да

USB Вход – 1

Максимална мощност – 4 x 50 W

2 x 50 W (4Ω) for subwoofer

1 x 70 W (2Ω) for subwoofer

Честота – 10 Hz до 20 kHz

S/N съотношение – 105 dB

Максимална консумация на ток – 10 A

Размер на шаси – 170 x 40 x 95 (W x H x D)

Единично тегло – 0.59

RCA терминали – Да

Сензор за вход на линията на високоговорителя – Да

Apple Съвместимост

iPhone X / iPhone 8 / iPhone 8 Plus

iPhone 7 / iPhone 7 Plus / iPhone SE

iPhone 6s / iPhone 6s Plus / iPhone 6 / iPhone 6 Plus

iPhone 5s / iPhone 5c / iPhone 5

Функции

Зареждане на батерията

Възпроизвеждане на музика

Android Съвместимост

Съвместимост с Android – Да

Бързо зареждане за Android – Да

Аудио

Еквалайзер – 31-бандове графичен еквалайзер

MOSFET 50 W x 4 Amplifier

Network Mode 3-Way Network Mode – Да

Listening Position Selector – Да

Manual TA (Time Alignment) – Да

High Pass Filter – Да

Low Pass Filter – Да

Subwoofer Control – Да

RCA Pre-Outs – 3 (Предни, задни, субуфер)

High Voltage Output (4Volt) – Да

FLAC – Да

Speaker line input sensor – Да

Аксесоари

Дистанционно управление

Съпътстващ софтуер за лесна настройка и корекции.

Дистанционно управление на основните функции чрез контролен панел

31-бандов параметричен еквилайзър, 66 стъпков кросовер и настройка от 6-12-24dB/oct, също така и time delay функция.

Носител на престижната награда EISA 2017

DSP Amplifier | 1200 W | 11 CH DSP + 4 x 150 W @ 2 ohm + 1 x 600 W @ 2 ohm | D-class Fully Bridgeable

AF M5.11 bit boasts five high-fidelity amplified channels 100W x 4 + 400W @4Ω*, 150WP x 4 + 600W @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! This is combined with native DSP working at 24 bit/96 kHz, extending the audio band up to 40 kHz and earning the coveted High-Resolution certification. Bridging channel pairs results in 200W x 2 + 400W @4Ω*, guaranteeing flexible and powerful performance. Support for the Audison B-CON’s Absolute Volume function guarantees maximum bit depth, even with wireless connections! Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.

Иновативен 8-канален усилвател с 14 канален DSP използващ специално разработен Analog Devices ADAU1467 чип

8 входа по високо/ниско ниво (и оптичен цифров вход Toslink) 

 

Мощност: 65W x 8 @4Ω,
              100W x 8 @2Ω 

Възможности:
 

AF C4.10 bitDSP Amplifier | 600 W | 10 CH DSP + 4 x 150 W @ 2 ohm | D-class Fully Bridgeable

AF C4.10 bit boasts four high-fidelity amplified channels 90W x 4 @4Ω*, 150W x 4 @2Ω*, with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! This is combined with native DSP working at 24 bit/96 kHz, extending the audio band up to 40 kHz and earning the coveted High-Resolution certification. Bridging channel pairs results in 300 x 2 @4Ω, guaranteeing flexible and powerful performance. Support for the Audison B-Con’s Absolute Volume function guarantees maximum bit depth, even with wireless connections!*Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.

Amplifier Tech Data

Channels 4

Class D-Class

Power supply voltage / fuse 11 ÷ 15 VDC / 1 x 30A

Operating power supply voltage 6.5 ÷ 17.5 VDC

Idling current 1 A

Standby Current Draw 1 mA

Consumption @ 14.4 VDC, 2Ω, Max Musical Power 29 A

Remote IN 4 ÷15 VDC (1 mA)

Remote OUT 6.5 ÷15 VDC (150 mA)

ART - Automatic Remote Turn on/ off from OUTPUT BTL speakers 1.5 VDC

AST - Automatic Signal Turn on/off (Selectable) 1.5 VDC

Efficiency Rated Power 81%

Amplifier Stage

Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0.03%

Bandwidth @ -1.5 dB 10 Hz ÷ 42 kHz

Damping factor @ 1 kHz, 4Ω, 2 VRMS 95

S/N ratio (A weighted @ 1 V Input) Master Input 98 dBA

S/N ratio (A weighted @ 1 V Input) Optical Input 105

Total Power RMS 600 W

Minimum load impedance 2Ω

Output Continuous Power (RMS) @14.4 VDC, 1% THD 4 Ch @ 4Ω: 90 W x 4

4 Ch @ 2Ω: 150 W x 4

2 Ch (Bridge 1/2; 3/4) @ 4Ω: 300 W x 2

Adjustable Crossover Yes

CEA Specifications

Output power @ 4Ω, 1% THD+N, 14.4 V 90 W x 4

SN ratio (ref. 1W output) 80 dB

Inputs / Outputs

Pre-In Inputs 0.6 ÷ 6 VRMS (15 kΩ Imp.)

Digital Input Yes

Pre Outputs 6

Hi Level Inputs 8

Low Level Inputs 8

Speaker-In Inputs 2.2 ÷ 22 VRMS (5 Ω Imp.)

Digital IN 1 x Optical S/PDIF; Max 192 kHz / 24 bit + 1 x Optical/Coaxial S/PDIF with optional F2O card

Digital Signal Processor

Audio DSP Converter Analog Devices ADAU1467 automotive qualified audio processor.

Processing @ 96 kHz.Analog Devices 3 x ADAU1978 (4ch) and ADAU1966A (16ch) A/D and D/A converters (24 bit/192 kHz) providing very high level performance

Filter type Full / High-Pass / Low-Pass / Band-Pass

Filter mode and slope Linkwitz-Riley @ 12/24/36/48 dB/Oct.

Butterworth @ 6/12/18/24/30/36/42/48 dB/Oct.

Bessel @ 6/12/18/24/30/36/42/48 dB/Oct.

Chebyshev @ 6/12/18/24/30/36/42/48 dB/Oct.

QLP @ 6 dB/Oct.

Crossover frequency 20 Hz ÷ 20 kHz

Phase control 0° / 180°, All-Pass filters

Analog Input Equalizer (20 ÷ 20k Hz) 12 Biquad + Delay

Output Equalizer Parametric/Graphic Biquad: 15 poles, 20 Hz ÷ 20 kHz

Time Alignment Distance 0 ÷ 510 cm / 0 ÷ 200.8 inches

Time Alignment Delay 0 ÷ 15 ms

Input Output Real Time Audio Monitor RTA

Control Connections

DRC Port Input for DRC AC remote control (Optional)

ADC Port Manage other Audison devices that support this standard

1 Wire Customizable functions (+ 12 V activated)

2 Wire Customizable functions (+ 12 V activated)

General Requirements

PC connections Micro USB 1.1 / 2.0 / 3.0 Compatible

Software/PC requirements Windows 10, Windows 11

Video Resolution with screen resize (min. res. 1024 x 768)

Ambient operating temperature range 0 °C to 55 °C (32 °F to 131 °F)

Weight 1.38 kg

DSP Amplifier | 1120 W | 14 CH DSP + 8 x 140 W @ 2 ohm | D-class Fully Bridgeable

AF M8.14 bit boasts eight high-fidelity amplified channels 90W x 8 @4Ω, 140W x 8 @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! This is combined with native DSP working at 24 bit/96 kHz, extending the audio band up to 40 kHz and earning the coveted High-Resolution certification. Bridging channel pairs results in 280W x 4 @4Ω*, guaranteeing flexible and powerful performance. Support for the Audison B-CON’s Absolute Volume function guarantees maximum bit depth, even with wireless connections!*Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.NEXT-GENERATION TUNING CAPABILITIES FOR MAXIMUM CONTROLAudison’s completely-new bit Drive PC software can analyze, route, and correct the signal in completely new ways – now you can measure, mix, and finally tune the sound with one powerful tool! The new Graphical User Interface simplifies every control and function, integrating acoustic measurement, and ensuring efficient tuning and great sound! The Acoustic RTA is integrated into the equalizer graph, and is compatible with your USB microphone or sound card. The Final EQ function allows final equalization without damaging the delicate left/right frequency relationships. The six processed preamp outputs are in addition to the eight amplified channels, allowing Forza’s DSP section to manage a larger system easily.ADVANCED OEM INTEGRATION CAPABILITIESForza’s eight analog inputs, plus an optical Toslink digital input, support total connectivity even with the most complex OEM systems.  If more analog inputs are required, the optional F4IN expansion card adds four additional analog input channels! If a Coaxial SPDIF or a second Toslink SPDIF input is needed, the optional F2O expansion card can be used. Audison’s classic de-EQ process is joined by de-Time and de-Phase capabilities, enabling sound restoration in nearly every OEM system., The electrical signal analysis ensures proper integration and correction for each input and output channel. The built-in universal speaker simulation technology (USS) yields maximum compatibility with any OEM Source, without muting or instability.AF M8.14 bit includes a set of six high-quality cables supplied with a protective printed strip placed upstream of the Molex connectors to increase the resistance to torsion